RCA BR200DV

Copyright © 2015 RCA Communications Systems
BR200D
TM
/ BR300D
TM
Professional Digital Two-Way Radio Instruction Manual
36
Press [*] to delete any unwanted characters.
6. Press [O] once message is composed.
7. Press [<] or [>] to nd the required alias or ID
and press [O] to select. OR - press [<] or [>]
to Manual Dial, press [O] to select. Input
subscriber ID and press [O].
8. The display shows Text Message:
<Subscriber/Group Alias or ID>, conrming
your message is being sent.
9. If the message is sent successfully, a tone
sounds and the display shows Message
Sent. OR - If the message is not sent, a low
tone sounds and the display shows Message
Send Failed. If the text message fails to send,
the radio returns you to the Resend option
screen.
Note: Your RCA Communications Systems dealer
can program a One Touch Access button to send
a predened Quick Text message to a predened
alias or ID.
Managing Fail-to-Send Text Messages
(BR300D
TM
Only)
You can select one of the following options
while at the Resend option screen:
• Resend
• Forward
• Edit
Resending A Text Message (BR300D
TM
Only)
1. Press [O] to resend the same message to the
same subscriber / group alias or ID.
2. If the message is sent successfully, a tone
sounds and the display shows Message
Sent. OR - If the message cannot be sent,
a low tone sounds and the display shows
Message Send Failed.
Forwarding a Text Message
1. Once in Messages, press [<] or [>] to navigate
to Inbox and press [O] to select.
2. Press [O] and [<] or [>] to Forward message
and press [O] to select.
3. Press [<] or [>] to nd the required alias
ADVANCED FEATURES (Continued)