press [O] to select.
3. Press [<] or [>] to navigate to Radio Settings
and press [O] to select.
4. Press [<] or [>] to navigate to LED Indicator
and press [O] button.
5. If the display shows Turn On, press [O] to
enable the LED Indicator and the display
shows All LEDs On. If the display shows Turn
Off, press [O] to disable the LED Indicator
and the display shows All LEDs Off.
Note: The display backlight, buttons and
keypad backlight are automatically turned off
if the LED indicator is disabled.
Turning the Introduction Screen On/Off
(BR300D
TM
Only)
You can enable and disable the Introduction
Screen if needed.
1. Press [O] to access the main menu.
2. Press [<] or [>] to navigate to Utilities and
press [O] to select.
3. Press [<] or [>] to navigate to Radio Settings
and press [O] to select.
4. Press [<] or [>] to navigate to Intro Screen
and press [O] to select.
5. If The display shows Turn On, press [O]
to enable the Introduction Screen and the
display shows Intro Screen On. If the display
shows Turn Off, press [O] to disable the
Introduction Screen and the display shows
Intro Screen Off.
Accessing General Radio Information
(BR300D
TM
Only)
Your radio contains information on the following:
• Radio ID
• Software version
• Codeplug Version
To Next Page
Loading...
