4. If there is no voice activity for a predetermined
period of time, the call ends.
5. BR300D
TM
Only - The radio returns to the
screen last viewed prior to initiating the call.
Making an All Call
This feature allows you to transmit to all users
on a channel. Your radio must be programmed
to allow you to use this feature.
1. Turn the Channel Selector Knob to select
the channel with the active All Call group
alias or ID.
2. Press the [PTT] button to make the call. The
LED lights up solid red and
3. BR300D
TM
Only - The Display shows the All
Call group alias or ID, and the All Call icon.
Note: Users on the channel cannot respond to
an All Call.
Making a Group or Private Call with
the One Touch Call Button
The One Touch Call feature allows you to make
a Group or Private Call to a predened alias
or ID easily. This feature can be assigned to a
short or long programmable button press. You
can only have one alias or ID assigned to a One
Touch Call button. Your radio can have multiple
One Touch Call buttons programmed.
1. Press the programmed One Touch Call
button to make a Group or Private Call to
the predened alias or ID.
2. Press the [PTT] button to make a call. Note:
If Talk Permit Function is enabled, wait for
the Talk Permit Tone to nish, then speak
clearly into the microphone.
3. BR300D
TM
Only - The display shows the
group/subscriber alias or ID, and the Group/
Private Call icon.
4. Release the [PTT] button to listen. When the
To Next Page
Loading...
Need help?
General
