DCN 141-01128-04 10/6/08
16
Main Menu - User Settings - Set Clock
The Set Clock screen allows you to set the Thermostat’s internal clock.
To set the Time and Date, move the cursor with the navigation arrows until the data you want to change is
highlighted.
Using the + and – buttons to increment or decrement the data to the desired setting.
When finished, press the SET button to return to the Main Menu screen or wait for screen to timeout.
NOTE: If the clock has been reset by an extended power outage, the Clock display on the
thermostat screen will be blinking. Pressing the MENU button will take you directly to this screen
to set the clock.
Set Clock Screen
Screen navigation buttons:
Set Clock
Time 12:00 PM
Date 7/13/08
Day Thu
Cancel and return to User Settings Menu
Move back with selection box navigation arrow
Move forward with selection box navigation arrow
Set the time and return to User Settings Menu
To Next Page
Loading...
Need help?
General
