Realtech REAL CLEAN SYSTEM I - M UV254 Analyzer Menu; Table 5: UV254 M Series Menu Selection of Cleaning Configuration

Real Clean System I v 2.1
Real Tech Inc. 15
8.1 M UV254 Analyzer Menu
Table 5: UV254 M Series menu selection of cleaning configuration
MENU ITEM
DESCRIPTION
CLEANING SYSTEM
Enable Clean
Press Enter then up/down to select 0 or 1 to turn on automatic cleaning system
Reset Clean
Press Enter then up/down to select 0 or 1 to reset fluid alarms after refilling fluid
Force Clean
Press Enter then up/down to select 0 or 1 to force a cleaning cycle
Pumping Time
Press Enter then up/down to select 60, 90 or 120 seconds
CLEAN FREQUENCY
0: No Cleaning
1: 4 hours
2: 12 hours
3: 24 hours
4: 3 days
5: 1 week
6: 2 weeks
7: 1 month
Select
Press Enter then up/down to select cleaning frequency (value 0-7)
ALARMS
Cleaning
Alarm status (0= no alarm 1=alarm)
Clean Fluid Empty
Alarm status (0= no alarm 1=alarm)
Clean Fluid Low
Alarm status (0= no alarm 1=alarm)