Reboot ARC145 - Adjusting Welding Current; Internal Machine Diagram

Version Number: ARC145-20210106A1
6
2、 To adjust the current, only the current can be adjusted.
Note:
1） The welding rod specification supported by REBOOT ARC145 is below 4.0(5/32in), usually 2.5(3/32in) and
3.2(1/8in). European style generally uses E6013, American style generally uses E7018，and stainless steel
generally uses ER308.
2） It supports welding of 1-8mm(1/64-5/64in) carbon steel and 1-5mm(1/64-7/32in) stainless steel. Aluminum can
not be welded. For carbon steel, please use carbon steel electrode. For stainless steel, please use stainless steel
electrode.