Version Number: RBT200P/ACDC-20210702A2
Operation Manual
Reboot RBT-200PD/ACDC welding machines adopts the latest pulse width modulation (PWM) technology
and insulated gate bipolar transistor (IGBT) power module, which can change work frequency to medium frequency
so as to replace the traditional Transistor transformer with the medium frequency transformer. its characterized with
portable, small size, light weight, low consumption and etc. It is also an intelligent and easy-to-operate multi-function
welding machine with MMA, DC TIG, AC TIG . It has the characteristics of strong welding performance and
diversified usage scenarios. Especially for welded aluminum and stainless steel,, and the welding effect is excellent.
It is highly praised by welding enthusiasts. It is also very friendly to beginners in welding and can quickly get started.
Part 1: Machine Introduction
1. Current display meter
The digital Ammeter is used to display the actual output current of the power source.
It is also used to display Parameters in Programming Mode.
Depending on the Programming Parameter selected, the status indictor adjacent to the Ammeter will
illuminate to show the units of the programming parameter.
When welding, the Ammeter will display actual welding current.
2. 2T/4T Mode selection
3. MMA/TIG Function selection
4. Function selection and digital adjustment.
Press once to select the function, and rotate to adjust the value.
To Next Page
Need help?
General
