Reboot RBA1400 - Positive Connection Setup; Negative Connection Setup

Version Number: RBA1400-20210106A1
2
7.
Positive connection
Install welding holder and grounding clamp.
8.
Negative connection
Install welding holder and grounding clamp.
Note: RBA1400D is AC 110V OR AC 220V voltage input .
Part 2: Introduction to the product and configuration list.
No.
Picture
Name
Qty
Remark
1
RBA1400
1
Please check the appearance after
receiving the machine, and power on to
check
2
Welding
holder
1
1.5m 16MM2 cable, 200A Italian welding
holder +10-25mm2 European quick plug
3
Ground
clamp
1
1.5m 16MM2 cable, 300A Ground clamp
+10-25mm2 European quick plug
4
Conversion
line
1
Conversion line only suit for 220V to
110V dual-voltage input machines, if not
dual- voltage machines no this line
included.
5
Manual
1
Normally provides manuals in English, if
you need other language like French,
German, Italian, Spanish, and Russian
please contact us to get electronic
version documents .
6
Warranty
Card
1
If you have more questions for
consultation, please contact us through
the after-sales mailbox on the card.
Part 3: Simple test for powering on the machine