Version Number: RBA1400-20210106A1
Reboot RBA1400 welding machine will undergo strict various tests when it leaves the factory to ensure that
every welding machine that reaches the user is of high quality, because our machine has to go through tens of
thousands of kilometers of long-distance transportation from the factory to the delivery to you. And many times of
handling, it is inevitable that some uncontrollable factors will cause some internal components of the machine to
become loose or even damaged during the process. We recommend that you perform a power-on inspection as soon
as you get the welding machine to ensure that what you receive is qualified product.
Precautions for power-on inspection:
1、 Please make sure your power supply voltage is 110V+-15% or 220+-15%. REBOOT RBA1400D supports 110V
and 220V input voltage in North America and Japan, and REBOOT RBA1400 supports 220V input voltage in the
UK, EU and other regions; if you have a generator power supply, please ensure that the generator is not less than
4000w.
2、 It is recommended to choose 50A circuit breaker protection when your power supply voltage is 110V, and 30A
circuit breaker protection when 220V.
3、 For the current machine, please choose the power plug that suits your local electrical law requirements
4、 Extension cord: #12 AWG or larger; 25’ (8m) or shorter.
Turn on the power switch of the machine and the fan on the back of the machine rotates, and the digital
display on the panel indicates that the power is normal.
To Next Page
Loading...
