Installation, Operation and Technical Manual Rectifier Technologies
158-1872-01 2 19-Feb-14
2. Summary of Programmed System Parameters
Ambient temperature alarm level
System output volts high threshold
System Output volts low threshold
Set number of SMRs in the system
Number of Battery strings installed
Battery current transducer full scale rating
CSU Access code (up to 7 digits)
Current system date and time
(After enabling AC 1-ph Monitor)
AC supply high voltage alarm
AC supply low voltage alarm
AC supply current transducer full scale rating
(After enabling 3-ph AC Monitor)
AC supply high voltage alarm
AC supply low voltage alarm
AC supply current transducer full scale rating
(After enabling Battery Monitor)
Battery Monoblock size x number
(see BCM section of manual for more detail)
Number of battery banks to be monitored
Cell positive deviation alarm
Cell negative deviation alarm
If included in the system refer to Site Monitor documentation.
Operating float voltage
3)
Operating equalisation voltage
3)
To Next Page
Loading...
