red lion PAXR - Setpoint Alarm Wiring; Front Panel Operation; Display Mode Navigation; Programming Key Functions

6.0 PROGRAMMING THE METER
OVERVIEW
PROGRAMMING MENU
6
5.0 REVIEWING THE FRONT BUTTONS AND DISPLAY
KEY DISPLAY MODE OPERATION PROGRAMMING MODE OPERATION
DSP Index display through Rate, Max., and Min. Quit programming and return to Display Mode
PAR Access Programming Mode Store selected parameter and index to next parameter
F1
#
Function key 1; hold for 3 seconds for Second Function 1 * Increment selected parameter value or selections
F2
$
Function key 2; hold for 3 seconds for Second Function 2 * Decrement selected parameter value or selections
* Factory setting for the F1, and F2 keys is NO mode.
** Factory setting for the RST key is
+$,!$% (Reset Display)
RST Reset (Function key) ** Advances digit location in parameter values
4.4 SETPOINT (ALARMS) WIRING
SETPOINT PLUG-IN CARD TERMINALS
SINKING OUTPUT LOGIC CARD
SOURCING OUTPUT LOGIC CARD