-3-
Released 2018-01-12 Drawing No. LP0932
Ordering Information ........................................................5
Introduction................................................................6
General Specifications .......................................................8
1.0 Setting the Jumpers .....................................................10
2.0 Installing the Controller ..................................................11
3.0 Wiring the Controller ....................................................12
4.0 Reviewing the Front Keys and Display ......................................13
5.0 Programming Loops.....................................................14
Display/Parameter/Hidden Loop Parameter Descriptions ...........................16
6.0 Programming: Configuration Loop ..........................................18
7.1 MODULE 1 - Input Parameters (1-IN)........................................18
7.2 MODULE 2 - Output Parameters (2-OP) .......................................21
7.3 MODULE 3 - Lockout Parameters (3-LC) .....................................24
7.4 MODULE 4 - Alarm Parameters (4-AL) (Optional) ...............................25
7.5 MODULE 5 - Control Parameters (5-CP) ......................................29
7.6 MODULE 6 - Profile Module Parameters (6-Pr).................................30
7.7 MODULE 7 - Serial Communications Parameters (-C) .........................31
Serial Communications .....................................................32
7.8 MODULE 9 Factory Service Operations (9-F).................................33
Troubleshooting ...........................................................34
Control Mode Explanations ..................................................35
PID Tuning Explanations ....................................................36
Setpoint Profile Operation ...................................................38
PXU Programming Quick Overview ............................................41
To Next Page
Loading...
