-33-
Released 2018-01-12 Drawing No. LP0932
9-FS
FACTORY
SERVICE CODE
P
Enter Code 66 to overwrite all user settings with Factory Setting.
Press and hold B to display Cod 66. Press :. The controller will display
r and then return to CNFP. Press = to return to the Display Loop.
REGISTER (4x) REGISTER NAME LOW LIMIT HIGH LIMIT
FACTORY
SETTING
ACCESS COMMENTS
25 Integral Action Disable 0 1 0 Read/Write 0 = Enabled, 1 = Disabled
26 Current Profile Segment 0 15 0 Read Only
27 Profile Segment Remaining Time 0 15 0 Read/Write 1 = 0.1 Minute
28 Starting Profile Number 0 15 0 Read/Write
29 Starting Segment Number 0 15 0 Read/Write
66
Cod