Need help?Do you have a question about the Redarc Smart Start SBI Series and is the answer not in the manual?
General| Brand | Redarc |
|---|---|
| Model | Smart Start SBI Series |
| Category | Cables and connectors |
| Language | English |
Explains the Smart Start® SBI as a microprocessor-controlled Smart Battery Isolator for multi-battery systems.
Alerts to the danger of explosive gases from lead-acid batteries during operation.
Guidelines on suitable battery types, avoiding sparks, and handling tools near batteries.
Advice on working with batteries, including assistance and protective measures.
Warns against connecting to control terminals to prevent unit damage and warranty voidance.
Details technical specifications for different SBI models, including voltage, current, dimensions, and warranty.
Guidance on securely mounting the Smart Start® SBI in a suitable location, avoiding engine heat.
Specific REDARC fuse kit recommendations for different SBI models for reliable fuse protection.
Table detailing recommended wire gauges (B&S) for different SBI models and cable lengths.
Key considerations for standard wiring, including cable sizing, grounding, and fuse placement.
Illustrates the correct connection sequence for the Smart Start® SBI, batteries, and associated components.
Diagram showing wiring for Dual Sensing SBIs, including solar panel and circuit breaker connections.
Explains LED flash codes (Code 1 and Code 2) for over-voltage and voltage drop faults.
Steps to verify correct operation after installation, including voltage checks and LED indicators.
Answers common questions about LED behavior, voltage spikes, repetitive switching, and usage scenarios.
Provides contact numbers for technical support in Australia, New Zealand, UK, Europe, USA, Canada, and Mexico.
To Next Page