Reecom Electronics R-1650C User Manual

Model: R-1650C
Owner's Manual
Please read before using this Alert Radio
S.A.M.E Digital Weather / All Hazard Alert Radio
Reecom Electronics Inc.
With AM/FM Digital Radio
http://www.reecominc.com

Reecom Electronics R-1650C Specifications

General

Brand	Reecom Electronics
Model	R-1650C
Category	Weather Radio
Language	English

Summary

FCC Information

Features

Getting Started

Choosing A Location

Select a location near a window facing the NOAA broadcast direction, away from obstructions and electrical noise.

Installing the Back-up Batteries

Radio requires four 1.5 Volt AA batteries for backup power during AC failure. Install correctly.

Powering Up the Radio

Connect the supplied AC adapter to the radio's DC Jack and a standard 120V AC wall outlet.

Setting Up the Radio

Setting Date / Time

Set the date and time accurately, as it is logged with alert messages for event memory.

Obtaining Weather Channel/County Codes From NOAA

Setting Weather Channel

Set the radio to the correct weather channel for your area using the NOAA broadcast or website.

Storing County Code

Store up to 26 county codes (FIPS codes) to monitor alerts for your local area or multiple areas.

Setting Alert Mode

Alert Option Table

Details alert response for visual and audio alerts, including VOICE, SIREN, and event display.

Setting Alert Mode Options

Configure how the radio responds to alerts: Alert Enable/Disable, VOICE or SIREN notification.

Setting Siren Volume

Siren Volume Adjustment

Adjust siren volume from level 00 to 16, with a mute option for non-critical events.

Alert Message Types

Lists 27 types of alert messages, including hazard warnings, emergencies, and weather alerts.

Receiving Alert Message

Alert Message Display and Response

Alerts trigger LCD display, flashing LED, and audio response based on alert option settings.

National Weather Service (NWS) Test Signals

Periodic test signals from NWS help confirm radio functionality. Beep tone can be enabled in menu P6.

Alert / Test Message Table

Alert Message Display and Audio Tone

Table detailing alert messages, their display text, and associated audio alert tones.

Non - Alert Messages

Non-Alert Message Table

Table listing non-alert messages that are saved to event memory without audio or visual alerts.

Setting Event Blocking (defeat siren / voice)

Event Blocking Configuration

Configure which alert messages (1-48) will not trigger siren/voice, only display on LCD.

Editing Event Blocking Settings

Instructions on how to select messages and set them to 'Event Blocked' or 'Event Not Blocked'.

ALARM OUT Socket

ALARM OUT Socket Functionality

Connects to home automation devices; outputs 6V DC or acts as a switch when alerts are received.

AUDIO OUT Socket

AUDIO OUT Socket Functionality

Outputs siren and voice signals to external audio systems like PA systems or external speakers.

Siren Test

Siren and Tone Testing

Pre-hear siren/beep tones for alerts/tests and test ALARM OUT socket functionality.

Deleting County Code

County Code Deletion Procedure

Steps to select a county code and set all digits to blank for deletion.

Operation

LCD Back Light Control

Control the LCD backlight by pressing the ENTER key when powered by AC adapter.

Accessing Program Menu

Press and hold PROG key for 2 seconds to enter the program menu while in standby mode.

Reviewing Stored County Codes

Use or keys to view the stored county codes while in standby mode.

Reviewing Alert Messages

Press MEMORY key to enter event memory and view logged alert messages and their details.

AM/FM Station Memory

Station Memory Save

Store up to 16 radio stations (8 AM, 8 FM). Tune to station, press MEMORY, select location, ENTER.

Station Memory Recall

Recall stored stations by tuning to the preset location using or keys.

Intro-Scan Functionality

Scans AM/FM stations, stopping for 10 seconds on each. Press Intro-Scan to exit scan mode.

Sleep Function (Radio Timer)

Setting the Sleep Timer

Set sleep timer from 1 minute to 1 hour 59 minutes for automatic radio shut-off.

Using the Sleep Timer

Activate sleep timer with SLEEP key. Subsequent presses show remaining time. Snooze/Stop to end.

Alarm Clocks

Setting Alarm Clock 1 and 2

Configure two alarm clocks with BUZZ or AUTO modes. Default times are 7:00 AM and 7:30 AM.

Activating and Stopping Alarms

Activate alarms with ALARM 1/2 keys. Stop with STOP key. SNOOZE repeats alarm for 7 mins.

Deactivating Alarm Clocks

Press and hold ALARM 1 or ALARM 2 key until the alarm clock icons disappear.

Trouble Shooting

No Sound or Power Issues

Check AC adapter connection to wall outlet and radio's DC jack for loose connections.

No Weather Broadcast

Verify weather channel is set correctly in program menu P2 and contact NOAA for broadcasting.

Poor Radio Reception

Extend antenna, rotate radio, ensure good connection, or check signal strength.

'RE-CHECK SET UP' Display

Check channel/county codes, reception, or NOAA transmission schedule if 'RE-CHECK SET UP' appears.

Specification

Power and Operating Parameters

Details power supply (9-14V DC), backup battery (6V), and operating temperature range.

Radio Band Specifications

Lists AM/FM band frequencies (87.5-108.5MHz FM, 520-1710KHz AM) and weather channels.

Weather Band Receiver Sensitivity

Provides specifications for receiving sensitivity, channel selectivity, S/N ratio, and distortion.

Physical Dimensions

Lists the physical dimensions of the radio as HWD: 203mm x 138mm x 47mm.

Service

Warranty Service Procedures

Steps for returning the product for warranty service, including packing and enclosures.

Out-of-Warranty Repair

Procedure and cost for out-of-warranty repairs, including shipping and handling fees.

Limited One-Year Warranty

Warranty Coverage and Exclusions

Details what the warranty covers and common exclusions like abuse, consumables, or unauthorized repair.

Warranty Claim Requirements

Requires original sales receipt specifying date of purchase for warranty claims.

Contact Information