Siren Test
The SIREN TEST menu page P8 lets you to pre-hear
and be familiar with the actual siren / beep tone
generated by the radio when actual alerts / tests
are received.
In addition, the ALARM OUT socket function can
be tested here. If desired, connect the external device
to the socket before proceeding to the steps below.
1. The siren / beep tone will last for about 15 seconds.
2. Press STOP key will stop the siren / beep tone.
3. During the siren, the ALARM OUT socket will
output control signal to trigger the external device.
4. When the siren / beep tone stops, press PROG key
to exit program menu page.
- 17 -
Info
Hint
1. Press and hold PROG key for 2 seconds to enter program
menu page. Skip this step if it is now in program menu.
2. Keep pressing key to menu page P8.
3. The warning siren, watch siren, advisory siren and beep
tone will be generated respectively each time you press
or ENTER key.
To Next Page
Loading...