Setting Up the Radio
The radio offers you an extensive range of functions
which are grouped in program menu pages as shown below.
To access the program menu page, press PROG key for two
seconds. Scroll with or key through the menu pages
and select the menu page by pressing ENTER key. Select
submenu pages and settings of your choice in the same way.
Press PROG key to return to the previous menu level, and
keep pressing PROG key to exit the program menu page.
If no key are pressed for about 5 minutes, the radio will
exit program menu page automatically. Two-beep sound
indicates wrong key is pressed.
Setting Date / Time
The date and time must be set correctly since they will be
logged into the event memory upon the alert message
reception.
- 6 -
Info
Note
Tips
Press and hold or key will change the
number continuously. Release the key to stop.
1. Press and hold PROG key for 2 seconds to enter program
menu page. Skip this step if it is now in program menu.
2. Press ENTER key to select menu page P1.
3. Press or key to set Month.
4. Press key to select Day.
5. Press or key to set Day.
6. Repeat steps 4 & 5 to set Year, Hour and Minute respectively.
7. Press ENTER key to save.
Menu
Page
SET DATE TIME
CHANNEL SELECT
ENTER COUNTY
ALERT MODE
SET EVENT BLOCKING
SIREN VOLUME
SIREN TEST
ALARM SOCKET
SET ALARM 1
SET ALARM 2
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
Menu Page Description
SLEEP TIMER
P11
To Next Page
Loading...