Setting Siren Volume
1. Press and hold PROG key for 2 seconds to enter program
menu page. Skip this step if it is now in program menu.
2. Keep pressing key to menu page P5.
3. Press ENTER key to select. The siren volume is displayed.
4. Press or key to adjust siren volume.
5. Press ENTER key to save and complete this section.
The radio provides 16 siren volume level adjustment for
different noise environment and hearing impaired use.
Siren mute option is available for non-critical events.
1. Press STOP key to stop and save the siren volume.
2. The ALARM OUT socket becomes active during siren.
If the radio receives the below alert messages and the
siren volume has been set to 00 or SIREN MUTE, it will
still be siren at the volume level the same as to what you
have previously set the volume to hear radio broadcast.
1. BIOLOGICAL HAZARD WARNING
2. CIVIL DANGER WARNING
3. CIVIL EMERGENCY MESSAGE
4. CHEMICAL HAZARD WARNING
5. DAM BREAK WARNING
6. CONTAGIOUS DISEASE WARNING
7. CONTAMINATED WATER WARNING
8. EMERGENCY ACTION NOTIFICATION
9. EMERGENCY ACTION TERMINATION
10 EARTHQUAKE WARNING
11. IMMEDIATE EVACUATION
12. FOOD CONTAMINATION WARNING
13. HAZARDOUS MATERIALS WARNING
14. HURRICANE WARNING
15. INDUSTRIAL FIRE WARNING
16. LOCAL AREA EMERGENCY
17. LAW ENFORCEMENT WARNING
18. LAND SLIDE WARNING
19. NUCLEAR POWER PLANT WARNING
20. RADIOLOGICAL HAZARD WARNING
21. SHELTER IN-PLACE WARNING
22. TORNADO WARNING
23. TROPICAL STORM WARNING
24. TSUNAMI WATCH
25. TSUNAMI WARNING
26. VOLCANO WARNING
27. WILD FIRE WARNING
- 10 -
Info
Tips
Note
To Next Page
Loading...