Set Sleep Timer
1. Press and hold PROG key for 2 seconds to enter program
menu page. Skip this step if it is now in program menu.
2. Keep pressing key to menu page P11.
3. Press ENTER key to select.
4. Press or key to set the timer .
The radio provides sleep function with sleep cycle time
from 1 minute to 1 hour 59 minutes (in one (1) minute
resolution). After turning on the radio, press SLEEP key
to start this function. When the sleep timer has counted
down to expire, the radio will turn off automatically.
The sleep function is only available in AM/FM band.
Press and hold the or key, the sleep timer value
will change continuously. Release the key to stop.
5. Press ENTER key to save.
To exit program menu, press PROG key.
Sleep Function (Radio Timer)
1. Turn on the radio in AM/FM band.
2. Press SLEEP key to activate sleep function, the
sleep timer will shown on the display.
.
Subsequent presses on SLEEP key will show the
remaining time.
If you decide to turn off the radio sooner, press SNOOZE
or STOP key and this will stop the sleep cycle.
Using Sleep Timer Function
Info
Hint
Tips
- 24 -
To Next Page
Loading...