Reecom Electronics R-1650C - Obtaining Weather Channel;County Codes From NOAA; Setting Weather Channel; Storing County Code

Setting Weather Channel
Obtaining Weather Channel/County Codes From NOAA
1. Press and hold PROG key for 2 seconds to enter program
menu page. Skip this step if it is now in program menu.
2. Press key to menu page P2.
3. Press ENTER key to select.
Storing County Code
1. Press and hold PROG key for 2 seconds to enter program
menu page. Skip this step if it is now in program menu.
2. Keep pressing key to menu page P3.
3. Press ENTER key to select.
4. Press or key to select county option.
In order to receive alerts, the radio must be set to the
correct weather channel and county code(s) (FIPS code) .
To get these information for your area, call the NWS
toll free number: 1-888-NWS-SAME (1-888-697-7263),
or visit the NOAA web site:
http://www.nws.noaa.gov/nwr/indexnw.htm
In the above web site, search the state and county for
your area and then write down the Channel (Frequency)
and county code(s). You may want to obtain the codes
for other local areas that you travel through to work.
The radio memory can store up to 26 county codes (FIPS
codes) to monitor alerts.
There are three (3) county options available for
your selection. They are:
1. ALL COUNTY CODES,
2. MULTIPLE COUNTY and
3. SINGLE COUNTY.
Press PROG key will leave this section
without update.
- 7 -
Info
Hint
Info
4. Press key to set the weather channel as you desired.
5. Press ENTER key to confirm and complete this section.
Press or key to adjust the volume.
Hint