14
ESC
Press the SET
mode and resume normal operation.
Note: At any time, you can press the ESC
and resume normal operation.
Verify Set Time and Date
During normal operation, press the TIME button once to display the hour,
minute, seconds. Press the button again to display the year, month
and day.
Verify Sampling Rate
selected sampling rate.
Data Logging
Data Recording Modes
Manual Data Logging: Press the LOG button to manually log up to 99
readings on a SD memory card (see Manual Data Logging Mode for details).
Automatic Data Logging: Setup the meter parameters in order to
automatically log data on a SD memory card. The number of data points
is limited by the size of the memory card.
Note: It is recommended to use a class 4 SDHC memory card between
The card must be inserted with the label side facing the rear of the meter.
Manual Data Logging Mode
In manual mode, the LOG button is pressed to manually log a reading on
the inserted SD card at any time. In order to setup the meter for manual
data logging, follow steps 1 through 7 below.
2. Press the REC
3. Press the LOG button to enter manual data logging function as
continued...
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
To Next Page
Loading...
