Reer MOSAIC MI8O2 - MOSAIC FAIL CODES

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
164 8540780 • 07/05/2018 • Rev.33
English
MOSAIC FAIL CODES
-
-
-
The two M1microcontrollers do not see the
same hw/sw configuration
2 or more same expansion modules with the
same node number
Exceeded max expansion modules number
One or more modules have detected a change
in the node number
A slave module has detected an external error
Errors related to memory MCM
from a MOR4 MOR4S8 -
EDM error on the couple RELAY1 and 2 used in
Category 4
from MOR4 MOR4S8 -
EDM error on the Relay 2 and 3 used in
Category 4
from a form or MOR4 MOR4S8 - EDM error on
the Relay 3 and 4 used in Category 4
From a module MV2, MV1 or MV0:
over-frequency detected on Proximity input
From a module MV2, MV1 or MV0: encoder
input signals not Standard (duty cycle, phase
displacement)
From a module MV2, MV1 or MV0:
over-frequency detected on Encoder input
Errors solid state output OSSD1
Errors solid state output OSSD2
Errors solid state output OSSD3
Errors solid state output OSSD3