Reflex Servitec User Manual

reflex ’servitec’
Vacuum spray-tube deaerator
Installation, operating and maintenance instructions
Status 09/04
General
Overview, type key 3
Operating panel 4
Safety instructions, regulations and standards 5
Installation
Scope of delivery 6
Place of installation 6
Installation 6
Installation diagrams 7 – 8
Electrical connection 9 – 10
Initial start-up
Prerequisite for start-up 10
Starting routine 11 – 12
Filling and bleeding the pump 12
Vacuum test 12
Hydraulic balancing 13
Automatic operation 13
Cleaning dirt traps 14
Operation
Automatic mode 15
Manual mode 15
Stop mode 15
Customer menu 16 – 17
Service menu 17
Summer operation 18
Default settings 18
Interface RS-485 18
Messages 19
Maintenance
Maintenance instrucitions 20
Disassembly 21
Periodic check-ups 21
Reflex service 21
General description
Operation 22 – 23
Operating parameters 23
Dimensions, weights 23
Applications 23
Electrical details 23
Declaration of conformity 24
Installation, maintenance and commissioning certificate 25

Reflex Servitec Specifications

General

Brand	Reflex
Model	Servitec
Category	Paint Sprayer
Language	English

Summary

General

Operating panel

General safety instructions

Essential safety precautions for installation, operation, and maintenance.

Installation

Place of installation

Installation steps

Provides step-by-step instructions for physically installing the 'servitec' unit.

Installation diagrams

System configuration diagrams

Electrical connection

Details wiring requirements and provides an overview of circuit board connections.

Start-up requirements

Initial Start-up

Starting routine

Guides through initial parameter setting upon first power-up.

Filling and bleeding the pump

Instructions for filling and bleeding the pump during initial start-up.

Vacuum test

Procedure for performing a vacuum test to ensure proper operation.

Hydraulic balancing

Adjusting pressure reducing valves and overflow valve for optimal performance.

Operation

Automatic mode

Details three deaeration programs: Permanent, Interval, and Make-up.

Manual mode

Explains manual operation for hydraulic balancing and system filling.

Customer menu settings

Customer menu configuration

Standard settings

Messages and troubleshooting

Explains error codes, causes, and remedies for operational issues.

Maintenance

Annual maintenance

Details annual maintenance requirements, leak tests, vacuum tests, and filter cleaning.

Disassembly procedures

Periodic check-up