Control
Your vessel uses a single side-mount control to operate the stern
drive on your Regal. e three positions the remote control lever
can shi into are forward, reverse, and neutral (straight up).
To help visualize the operating principles, we have used a clock
mode on the next page. e lever in the straight up position is
indented in the neutral position. In order to start the engine, your
control lever must be in the 12 o’clock neutral position.
3-33
4
3
2
1
Button under control handle (3)
must be pulled up simultaneously
along with pushing button (1) in to
engage throttle only neutral posi-
tion.
Typical Control Lever In Neutral Position
1) Neutral Release Buttons 3) Control Lever
2) Trim Control Switch 4) Safety Lanyard
To Next Page
Loading...
