Chapter 6
6-20
DRAIN PLUG
If your boat is towed to the launching
ramp ensure that the drain plug is
installed with a wrench not just nger
tight. Do not overtighten it. e drain
plug is made of a polymer material
that is very hard and resistant to
the water environment. When
relaunching on trailer pull the drain
plug and let any accumulated bilge
water drain out at the ramp. Run your
nger through the opening to clear any debris.
If using “dry” storage racks at marinas make sure the drain plug is
removed anytime the vessel is in dry dock.
To Next Page
Loading...
