Chapter 4
4-6
COLOR GAUGE FUNCTION
Red 4 Positive Feed
Red 2 Positive Feed, Starter Battery
Red 2 / 0 Main DC Panel Feed
Red 00 Battery Cable To Engine
Red / Black 16 Windlass Up
Red / White 16 Windlass Down
Yellow 12 Blower
Yellow / Black 16 Stereo Memory
Yellow / Black 16 Track Monitor
Yellow / Red 14 Engine Cranking Circuit
e standard wire color, gauge size, and function shown is used
throughout the marine industry. e chart is helpful in identifying
wire circuitry during troubleshooting or the adding or marine
accessories. NEVER replace a wire with a size other than shown
in the chart. is practice could result in re or component failure.
Contact your Regal dealer for replacement wires and harnesses.
DC Switches
Switches located at the helm are part of your DC circuitry. Switches
are in essence a break in the circuit from the battery to your
electrical components. When the switch is turned on, a red light
shows activation. See chapter 3.