INT-15
Introduction
ABYC Yacht Plate
Close to the helm on Regal boats over 26’ in length is a NMMA yacht
plate. A typical yacht plate for domestic vessels is shown below.
This plate recognizes that your vessel was built to design compliance
standards in effect on the date the certifi cation was verifi ed. The plate
also states that your vessel complies with United States Coast Guard
safety system standards in effect on the date of certifi cation.
Note: Overloading, improper loading and weight distribution are
well documented causes of accidents. Provide for an extra margin
of safety in rough sea conditions.
TYPICAL EXAMPLE SHOWN
To Next Page
