3-11
and leaks. Your Regal boat uses an aluminum or polyester fuel tank
that has been tested several times along with other fuel system
components for safety requirements and dependability in house, and
they are inspected independently by National Marine Manufactures
Association personnel. Typical fuel tank shown below.
s
t u
v
w
European Stlye Fuel Tank Shown
1) Fuel Sender 4) Fuel Feed Line
2) Anti Siphon Valve 5) Fuel Fill Line
3) Fuel Vent Line
ENGINE LUBRICATION
Whenever two components rub together, friction causes wear on
both components. To minimize the wear on your engine, a lubrication
system has been put in place to help components slide next to each
other easier. This is particularly important within the inner workings
of an engine. It is important to ensure your lubrication system is
working properly at all times.
Your Regal utilizes lubrication and fl uids that need regular check ups.
Refer to your outboard engine owner’s manual for specifi c details
regarding the proper maintenance procedure of your lubrication
system.
To Next Page
