Equipment Operation
As an option, a teak cockpit
table may be found in a cockpit
storage locker. When using the
table ensure the table pedestal
leg is installed in the receiver
securely. Pull the latch pin and
hold until the table pedestal leg
slides in the receiver sleeve. Then release the latch pin. When installed,
there are normally table receivers located in select cockpit areas.
Periodically lubricate the latch pins with a silicone lube spray.
COCKPIT TABLE STORED
RECEIVERBOW LOCATION
STERN LOCATION
COCKPIT LOCATION
COCKPIT TABLE-TYPICAL
To Next Page
