If installed, before each outing make sure the chemical toilet is fi lled with
the proper chemicals, paper is
available, and the holding tank
is empty.
To fill the toilet follow
t h e m a n u f a c t u r e r ’ s
recommendations for mixing
the solution. Use the fill to
pour in the deodorant chemical
and water. By pushing down
on the bellows the chemical
mix in released to rinse and
help flush the toilet bowl.
When the fl ush valve is pulled
forward the toilet bowl waste
water empties into the holding
tank. Close the fl ush valve after
each use.
The chemical toilet features a holding tank level indicator. When full
the lower holding tank must be emptied by fi rst separating it from
the upper toilet bowl assembly. Before proceeding, ensure the fl ush
valve in completely closed. Find the latches that allow the 2 units to be
separated. Once separated, fi nd an environmentally friendly facility to
dispose of the waste.
Fill
Bellows
Holding Tank
TOILET
To Next Page
