CHAPTER 6
Typical Bimini Top/Sunshade With Power Tower
CANVAS-POWER TOWER
The bimini/sunshade provides partial sun protection for the helm
and companion cockpit area.
For trailering and storage purposes, the bimini/sunshade must be
rolled up and stored in the boot.
The sunshade assembly must be collapsed back against the tower and
clipped around the tower with the quick release clips. This is also
how the sunshade should be stored with speeds exceeding 35 miles
per hour. Be aware of potential carbon monoxide buildup while the
sunshade is in use. Always store bimini/sunshade in the boot before
any highway towing.