3-13
Power Trim Fluid
Power trim fl uid allows your outboard to trim up or down. This is
particularly useful when trying to get your boat to plane where the hull
is as much out of the water as physically possible, reducing friction,
and improving ride performance.This power trim fl uid is used in
hydraulic rams that maneuver the outboard unit, and shouldn’t need
to be replaced very often, if at all.
Power trim fl uid should be checked regularly, despite not requiring
replacement unless something serious happens. Discoloration or water
presence indicates a water leak in the stern drive. In that case, contact
your Regal dealer. Use outboard manufacturer’s recommended fl uid.
To Next Page
Loading...
