43
Equipment Operation
Final top hole position
Illustration A
Clevis CC
Pin
Clevis Pin
Clevis
Forward Strap/Eyelet
8. Lengthen or shorten the straps as needed to alter the de-
sired top tightness or to latch the strap . While running the
vessel twist the straps as needed to eliminate any whistling noise. See
illustration 2.
1
2
10.. If available, install the windscreen, side curtians and aft
curtiin. The side curtains are normally marked left or right. If
not use a highlighter to mark them for easier identification.
Remember to roll not fold any canvas parts especially any
with the see through plastic.
9. Repeat the same procedure with the aft straps. Review the
straps and bimini top fit. Readjust any straps as needed to
provide tightness to the entire bimini top and/or to level out
the top surfaces if other canvas parts are to be installed.
To Next Page
Loading...
