EasyManua.ls Logo

Regency C34 - User Manual

Regency C34
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MODELS: C34-NG10 Natural Gas C34-LP10 Propane
C34 Classic Direct Vent
Freestanding Gas Stove
Owners &
Installation Manual
www.regency-re.com
C34 Video
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
- WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch: do not use any phone in your building.
Leave the building immediately.
Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's
instructions.
• If you cannot reach you gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious
injury, death, or property damage.
REGENCY FIREPLACE PRODUCTS. 6988 Venture St., Delta, BC Canada, V4G 1H4
919-490
03.18.15
Tested by:
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Regency C34 and is the answer not in the manual?

Summary

Safety Warnings and Gas Leak Procedures

Fire or Explosion Hazard Warning

Critical safety warning about fire or explosion hazards if warnings are not followed.

Gas Leak Detection and Response

Immediate actions to take if a gas leak is detected, including evacuation and contacting authorities.

Appliance Safety and Operation Precautions

Hot Glass Hazard Warning

Warning about hot glass surfaces and the risk of severe burns; keep children away.

Hot Surfaces and Flammable Materials

Cautionary advice regarding hot surfaces during operation and keeping flammable materials away.

Mobile and Manufactured Home Installation Requirements

Appliance Standards and Compliance

Details on appliance standards, testing, and compliance for mobile/manufactured homes.

Appliance Dimensions and Clearances

Dimensional Drawings and Measurements

Illustrations showing the physical dimensions of the gas stove.

Minimum Clearance Requirements

Minimum clearances to combustibles based on installation diagrams.

Appliance Safety Decal and State Requirements

Safety Decal Content

Details of the safety decal found on the appliance, including model and gas specifications.

Massachusetts Specific Installation Regulations

Specific installation and safety requirements for appliances in Massachusetts.

Massachusetts CO Detector and Signage Mandates

CO Detector and Signage Requirements

Detailed requirements for carbon monoxide detectors and exterior signage in Massachusetts.

General Installation Safety and Precautions

Operation Safety and Child Protection

Safety advice for operating the appliance, especially concerning children and hot surfaces.

Maintenance and Cleanliness Safety

Guidelines for safe maintenance and cleaning of the appliance, emphasizing cleanliness.

Installation Guidelines and Safety Information

Important Installation Warnings

Crucial instructions and warnings that must be followed before starting installation.

General Safety During Installation

Essential safety principles and codes to adhere to during appliance installation.

Installation Planning and Location

Installation Checklist and Steps

A step-by-step checklist to ensure all installation tasks are completed correctly.

Stove Location and Clearances

Guidance on selecting a location and maintaining required clearances to combustibles.

Mobile Home Installation Notes

Specific additional requirements for installing the appliance in manufactured or mobile homes.

Optional Fan Installation

Pedestal and Leg Unit Fan Installation

Detailed steps for installing the optional circulation fan into pedestal or leg units.

Optional Fan Installation and Removal

Fan Control Module and Wiring

Instructions for installing the Fan Control Module (FCM) and connecting power.

Fan Assembly Removal Procedure

Step-by-step guide on how to safely remove the appliance's fan assembly.

Stove Base Assembly

Pedestal Assembly Process

Instructions for assembling the pedestal base for the stove.

Leg and Bottom Shield Assembly

Steps for attaching the legs and bottom shield assembly to the stove.

Venting System Installation Guidelines

Venting Introduction and Precautions

Overview of venting systems and critical precautions for safe installation.

Installer Safety Precautions

Safety measures for installers to follow during the installation process.

Vent Restrictor Position Settings

Guidance on setting the vent restrictor position based on installation requirements.

Exterior Vent Termination Clearances

Vent Terminal Location Diagrams

Diagrams and table detailing minimum clearance requirements for vent terminal locations.

Rigid Pipe Venting Component Guide

Venting Component Cross-Reference Chart

Chart cross-referencing rigid pipe venting components from various manufacturers.

Venting Components and Offset Calculations

Venting Component Equivalents

Additional cross-reference information for venting components and manufacturer websites.

Offset Pipe Length Determination

Table and guide for determining correct offset pipe lengths for venting.

Rigid Pipe Venting System Options

Horizontal and Vertical Termination Types

Overview of rigid pipe venting systems for horizontal and vertical terminations.

Venting Arrangements and Restrictions

Horizontal Venting Arrangement Diagrams

Diagrams showing allowable combinations for horizontal vent runs with restrictor positions.

Vertical Venting Arrangement Diagrams

Diagrams for vertical venting systems, including restrictor positions for mobile homes.

Venting Configuration Examples

Horizontal Venting with Elbows

Examples of horizontal venting configurations using two 90° elbows and length limits.

Vertical Venting with Elbows

Examples of vertical venting configurations using two 90° elbows and length limits.

DV Stove Horizontal Vent Kit Installation

Horizontal Vent Kit Components List

List of components included in the DV stove horizontal vent kit.

Installing the Horizontal Vent Kit

Step-by-step instructions for installing the horizontal vent kit.

Horizontal Vent Kit Installation Details

Pipe and Terminal Assembly Steps

Detailed steps for assembling pipe sections, adapters, and vent terminals.

Dura-Vent Termination Kit Planning

Dura-Vent Planning and Clearances

Planning considerations and clearance requirements for Dura-Vent termination kits.

Dura-Vent Horizontal Installation Procedures

Horizontal Installation Steps

Step-by-step guide for installing Dura-Vent horizontal vent terminations.

Snorkel and Below Grade Installation

Specific instructions for snorkel and below-grade installations.

Vent Termination and Vertical Installation

Horizontal Termination Attachment Details

Details on attaching vinyl siding standoffs and vent caps for horizontal termination.

Vertical Vent Termination Installation

Steps for installing vertical vent terminations through ceilings and roofs.

Vertical Venting and Cathedral Ceiling Support

Vertical Venting Height and Slope Requirements

Requirements for vertical vent height based on roof pitch and slope.

Cathedral Ceiling Vent Installation

Specific procedures for installing vents in cathedral ceilings.

Chimney Conversion to Direct Vent Systems

Class-A Metal Chimney Conversion Steps

Instructions for converting an existing metal chimney to a direct vent system.

Masonry Chimney Conversion to Direct Vent

Masonry Chimney Conversion Procedures

Detailed steps for converting an existing masonry chimney to a direct vent system.

System Data and Gas Connections

System Data and Specifications

Technical specifications for the gas appliance, including input ratings and pressures.

Gas Connection and Pressure Testing

Procedures for connecting the gas supply and performing pressure tests safely.

Valve and Battery Component Information

SIT 829 Valve Description

Description of the SIT 829 gas control valve and its components.

DC Sparker Battery Replacement

Instructions for replacing the battery in the DC sparker box.

Log Installation and Door;Glass Frame

Log Installation Procedure

Step-by-step guide for correctly positioning the logs and embers for proper flame.

Door and Glass Frame Assembly

Instructions for handling and securing the stove's door and glass frame.

Appliance Features and Final Checks

Safety Screen Installation and Removal

How to install or remove the safety screen for maintenance.

Optional Wall Thermostat Installation

Information on installing an optional wall thermostat and wire length guidelines.

Final Appliance Check Procedure

Steps to ensure the appliance is firing correctly and safely before customer use.

Electrical Wiring and Grounding

Appliance Wiring Diagram

Diagram illustrating the electrical connections for the appliance, including fan and controls.

Pilot and Aeration Adjustment Procedures

Pilot Flame Adjustment Guide

How to check and adjust the pilot flame for correct pattern and operation.

Aeration Adjustment Procedure

Guidance for adjusting the air shutter, primarily for high elevations.

Appliance Operating Procedures

First Fire and Initial Operation Advice

Advice for the initial burn-in process, including paint curing and odor.

Lighting and Shutdown Procedures

Step-by-step instructions for lighting the pilot and operating the appliance.

Lighting Plate Instructions and Safety

Safety Before Lighting Appliance

Critical safety warnings and procedures to follow before attempting to light the appliance.

Appliance Lighting and Shutdown Steps

Detailed instructions for lighting the pilot and turning off the gas appliance.

Appliance Sounds, Maintenance, and Venting Care

Normal Operating Sounds Explained

Explanation of typical sounds produced by the appliance during normal operation.

Routine Maintenance and Cleaning

Routine maintenance tasks for the appliance, including cleaning and inspections.

General Vent System Maintenance

Guidelines for inspecting and maintaining the venting system for safety and performance.

Log Replacement Procedure

Instructions for safely replacing the logs in the appliance.

Glass and Valve Assembly Maintenance

Glass Gasket and Replacement

Information on the glass gasket and procedures for replacing the glass panel.

Valve Assembly Removal and Installation

Detailed steps for removing and installing the gas control valve assembly.

Main Assembly Parts Identification

Main Assembly Components List

List of part numbers and descriptions for the main assembly of the appliance.

Burner Assembly and Log Set Parts

Burner Assembly Components List

List of part numbers for the burner assembly, including logs and related components.

Base Options and Accessories

Base and Pedestal Component List

List of part numbers for base options, pedestals, and related accessories.

Product Warranty Information

Limited Lifetime Warranty Coverage

Comprehensive details of the limited lifetime warranty, coverage, and conditions.

Warranty Exclusions and Terms

Specific exclusions, conditions, and limitations of the product warranty policy.

Warranty Registration and Installer Details

Online Warranty Registration Process

Information on registering the product warranty online for updates and offers.

Installer Information Recording

Section for installers to record essential information about the installation.

Regency C34 Specifications

General IconGeneral
TypeWood Stove
Firebox MaterialSteel
EPA CertifiedYes
Blower IncludedOptional
WarrantyLimited Lifetime
Heating Capacity1, 000 - 2, 000 sq ft

Related product manuals