20 Maintenance and Service
Resetting the Application Memory
This procedure may only be carried out by qualified resellers and requires advanced
knowledge. The application will be permanently lost after this procedure.
To reset the processor’s program memory (application program), use the reset button
accessed trough the small hole on the right side of the unit. A tip is to use a paper-clip to
access the reset button.
Accessing the reset button.
Updating EXOreal
This procedure may only be carried out by qualified resellers and requires advanced
knowledge!
The Operation System is updated from the RS485 port. Use EXOapt 2004 or later.
To Next Page
Loading...
