Appendix 31
Chapter 8 Appendix
The EMC and LVD Directive
As of January 1st 1996, all electric/electronic products must be CE marked on delivery from
the manufacturer and they must comply with certain requirements specified in the EMC and
LVD Directives. The Directives are issued by the EU commission.
The EMC (ElectroMagnetic Compatibility) directive describes the ability of a product to
operate satisfactorily within its environment without disturbances. The LVD (Low Voltage
Directive) directive mainly concerns electrical safety.
The EMC and LVD directives apply to all electric/electronic apparatus, systems and
installations.
Declaration of Conformity
EMC
Units specified in this manual are CE marked and approved according to the following
Generic EMC standards:
EN61000-6-1 (immunity)
EN61000-6-3 (emission)
LVD
Units specified in this manual are CE marked and approved according to the LVD directive.
Note that external power supplies generating 24V for EXO controllers must be CE
marked as SELV, safety extra low voltage, or PELV, protected extra low voltage,
power supplies.
To Next Page
Loading...
Need help?
General
