2
5
3
4
1
NU760_1_G2-FRA.qxd 9/11/05 17:03 Page 2.34
CRUISE CONTROL/SPEED LIMITER: cruise control function (continued)
2.34
System standby
The function is interrupted when
you:
- depress the brake pedal,
- depress the clutch pedal or shift
into neutral if the vehicle has an
automatic transmission,
- press switch 4.
In all three cases, the cruising speed
is stored.
Returning to the cruising speed
If a speed has been stored, it is
possible to recall it by pressing
button 3 on condition that you are
driving faster than 18 mph
(30 km/h) and that you are sure that
the driving conditions are suitable
(traffic, road surface condition,
weather conditions, etc.).
Switching off the function
Press the on/off switch 1: in this
instance, the speed is no longer
stored.
The instrument panel indicator light
goes out to confirm that the function
is no longer operating.
Pressing button 2 or 5 reactivates
the cruise control function
without reactivating the stored
speed: the speed at which the
vehicle is moving is stored.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the
brake pedal.
NU760_1_G2-ENG.qxp 27-Dec-05 18:39 Page 2.34 (Black/Process Black plate)
To Next Page