A
2
1
3
4
4
B
NU760_1_G5-FRA.qxd 10/11/05 8:35 Page 5.02
EMERGENCY SPARE WHEEL
5.02
Tool A made up of ratchet wrench 2
and socket 1 must be used.
These components are located in the
tool kit in the luggage compartment
(refer to the information on Tool kit
in Section 5).
Check that the socket 1 is properly
attached to the ratchet wrench 2.
The ratchet wrench has one
direction for tightening and one for
undoing. Change sides when you
reverse the procedure (tightening to
undoing or vice versa).
Emergency spare wheel B
This is located under the vehicle.
- Lift cover 3 in the tailgate;
- remove the cover;
- unscrew it completely using
tool A, the holding cable for the
wheel moves and drops to the
ground.
- stand the wheel up outside the
vehicle;
- press lock 4 and turn it a quarter of
a turn;
- run the holding cable across the
wheel rim and release the wheel.
NU760_1_G5-ENG.qxp 27-Dec-05 18:44 Page 5.02 (Black/Process Black plate)
To Next Page
Loading...
