2
1
4
3
4
NU760_1_G5-FRA.qxd 10/11/05 8:36 Page 5.23
FUSES
5.23
Fuse box 3
If an electrical component fails to
operate, check that the fuses are
sound before making further
investigations.
Open cover 1 then lift flap 2.
Refer to the fuse allocation label
(shown on the page opposite) under
the flap 2 (shown on the page
opposite) to change the fuses.
It is not advisable to use the free fuse
locations.
Remove the fuse using tweezers 4.
To remove the fuse from the
tweezers, slide the fuse to the side.
In accordance with local
legislation or as a precautionary
measure:
Obtain an emergency set of spare
bulbs and fuses from your
RENAULT Dealer.
Check the fuse in question
and, if necessary, replace it
with a fuse of the same
rating.
If you fit a higher-amp fuse, it may
cause the electrical circuit to
overheat (risk of fire) in the event of
a consumer drawing an excessive
current.
CORRECT INCORRECT
NU760_1_G5-ENG.qxp 27-Dec-05 18:44 Page 5.23 (Black/Process Black plate)
To Next Page
Loading...
