1
C
D
B
A
NU760_1_G1-FRA.qxd 10/11/05 10:11 Page 1.75
1.75
WINDSCREEN WASH/WIPE
Vehicle fitted with
f
an intermittent front
windscreen wiper
With the ignition on, move stalk 1
- A off
- B intermittent wiping
The wipers will pause for several
seconds between sweeps. You
can vary the time between
sweeps by turning the centre
ring on stalk 1.
- C normal wiping speed
- D fast wiping speed
Vehicle fitted with front
windscreen wiper with rain
sensor
With the ignition on, move stalk 1
- A off
- B automatic wiper function position
When this position is selected,
the system detects water on the
windscreen and triggers wiping
at a suitable wiping speed.
The centre ring on stalk 1
enables you to vary the
sensitivity of the automatic
wiping from – to ■:
- represents minimum sensitivity
■ represents maximum
sensitivity.
- C normal wiping speed
- D fast wiping speed
Vehicles with automatic selection
of wiping speed
When driving with a wiping speed
selected, the wiping speed changes
to a lower speed if the vehicle stops:
- from fast wiping speed, the speed
will change to normal wiping
speed;
- from normal wiping speed, the
speed will change to intermittent
wiping.
As soon as the vehicle moves off,
wiping will return to the speed
originally selected.
When the vehicle is stationary, any
movement on the stalk 1 takes
priority and cancels the automatic
setting.
Note:
If for any reason the wipers cannot
move (e.g. stuck to windscreen by
ice), the system will automatically
cut off the power supply to the
wipers.
NU760_1_G1-ENG.qxp 27-Dec-05 18:37 Page 1.75 (Black/Process Black plate)