2
1
1
NU760_1_G1-FRA.qxd 10/11/05 10:11 Page 1.77
1.77
REAR SCREEN WASH/WIPE
Rear screen wiper with
e
timer
With the ignition switched on, turn
the end of stalk 1 to align mark 2
opposite the symbol.
Rear screen wash/wipe
j
With the ignition switched
on, turn the end of stalk 1 to align
mark 2 opposite the symbol.
When the stalk is released, it returns
to the rear wiper position.
Special note
If the windscreen wipers are
operational when you select reverse
gear, the rear screen is wiped
intermittently.
Before using the rear wiper, check
that no transported object can
obstruct the travel of the blade.
In frosty weather, make sure that
the wiper blades are not stuck by
ice (risk of motor overheating).
Monitor the condition of the
blades. Replace the wiper blades as
soon as they begin to lose efficiency
(approximately once a year).
NU760_1_G1-ENG.qxp 27-Dec-05 18:37 Page 1.77 (Black/Process Black plate)
To Next Page
Loading...
