1.112
ENG_UD60007_2
Eclairages et signalisations extérieures (X62 - Renault)
á
Main beam headlights
With the dipped beam headlights lit,
pull the stalk 1. This indicator light on
the instrument panel comes on.
To return to the dipped headlight posi-
tion, pull stalk 1 towards you again.
2
1
EXTERIOR LIGHTING AND SIGNALS (3/5)
Automatic main beam
headlights
Depending on the vehicle, this system
switches the main beam headlights on
and off automatically. The function uses
a camera located behind the interior
rear-view mirror to detect vehicles that
are following and coming in the oppo-
site direction.
The main beam headlights come on au-
tomatically if:
– exterior light is weak;
– no other vehicles or lighting are de-
tected;
– the vehicle speed is above approxi-
mately 30 mph (45 km/h).
If any of the above conditions are not
fulfilled, the system switches to dipped
beam headlights.
Note: make sure the windscreen is not
obscured (dirt, mud, snow, condensa-
tion etc.).
Using the portable naviga-
tion system at night in the
windscreen area below the
camera may disturb the op-
eration of the “automatic main beam
headlights” system (risk of reflection
on the windscreen).
The system may encounter difficul-
ties under certain conditions, inclu-
ding:
– extreme weather conditions (rain,
snow, fog, etc.);
– obstruction in front of the wind-
screen or camera;
– when a following or oncoming ve-
hicle has weak or hidden lighting;
– incorrect settings for the front
headlights;
– reflective systems;
– ...
To Next Page
Loading...
