2.37
ENG_UD60008_2
Avertisseur d’angle mort (X62 - Renault)
Deactivation/activation
Press 3 to deactivate the function.
Warning light 2 comes on.
Pressing again reactivates the function.
Le warning light 2 disappears and the
message “blind spot alert activated” is
displayed on the instrument panel.
BLIND SPOT WARNING (2/6)
2
1
Operation
This function gives a warning:
– when the vehicle speed is between
approximately 19 mph (30 km/h) and
87 mph (140 km/h);
and
– when another vehicle is in the blind
spot area A and travelling in the
same direction as your vehicle.
Indicator 4
An indicator light 4 is located on each
rear view mirror 5.
Note: clean the rear view mirrors 5 reg-
ularly so that the indicators 4 can be
seen.
4
B
C
D
When the engine is started, the
system remembers its last recorded
position when the ignition was last
switched off.
3
4
5
The function does not notify the
driver if the other vehicles are not
moving.
To Next Page
Loading...
