2.40
ENG_UD60008_2
Avertisseur d’angle mort (X62 - Renault)
BLIND SPOT WARNING (5/6)
This function is an additional driving aid. This function is not under any circumstances intended to replace the due care
and attention of the driver, who should at all times be in control of the vehicle.
The driver should always adapt their speed to the traffic conditions, regardless of the system indications.
The system should under no circumstances be taken to be an obstacle detector or an anti-collision system.
System servicing/repairs
– In the event of an impact, the alignment of the sensors may be changed and its operation may consequently be affected.
Deactivate the function and consult an authorised dealer.
– Any work in the area where the sensors are located (repairs, replacements, etc.) must be carried out by a qualified profes-
sional.
Only an authorised dealer is qualified to service the system.
System disturbance
Some conditions can disrupt or damage the operation of the system, for example:
– complex surroundings (metal bridges, tunnels, roads with barriers at the edge, etc.);
– poor weather conditions (snow, hail, black ice, etc.).
Risk of false alarms or absence of warnings
In the event of the system behaving abnormally, deactivate it and consult an authorised dealer.
To Next Page
