2.41
ENG_UD60008_2
Avertisseur d’angle mort (X62 - Renault)
BLIND SPOT WARNING (6/6)
Limitation of the system operation
– The area around the sensors should be kept clean and free of any modifications in order to ensure the proper opera-
tion of the system.
– Small objects moving close to the vehicle (motorcycles, bicycles, pedestrians, etc.) may not be recognised by the system.
– When turning into a bend, the radars may temporarily cease to detect vehicles in adjacent lanes.
– The system may not provide a warning when the other vehicles are travelling at a significantly different speed.
– The vehicle is travelling on a winding road.
Deactivating the function
You must disable the function if:
– the area around the sensors has been damaged;
– the vehicle is fitted with a towbar that is not recognised by the system.
To Next Page
Loading...
