NU710_6_G3-FRA 4/03/05 9:54 Page 3.10
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T3-ENG.win 2/5/2005 9:39
-page10
3.10
CLIMATE CONTROL (continued)
Ambient temperature:
(automatic mode)
(continued)
Operation
To obtain and maintain the
temperature selected and good
visibility, the system controls:
- the ventilation speed;
- the distribution of air;
- the air recirculation management;
- switching the air conditioning on
or off;
- the air temperature.
The values displayed are the air
temperature setting.
When the vehicle is started in cold
or hot weather, increasing or
decreasing the values displayed
does not mean that the temperature
is reached more quickly, whatever
the indicated temperature may be,
the system optimises the increase
or decrease in temperature (the
ventilation system does not start
instantly at maximum speed: it
gradually increases until the engine
temperature is sufficient, which
may take from a few seconds to
several minutes).
Generally speaking, unless there is
a particular fault, the dashboard air
vents should remain open.
Adjusting automatic mode
The automatic mode is the system's
normal operating mode but you may
alter the selections made by the
system (air distribution, etc.). These
options are explained on the
following pages.
The automatic mode is the
recommended mode of use: in
this mode the automatic climate
control system guarantees
comfort in the passenger
compartment and good visibility
(except in the event of extreme
conditions), while optimising
consumption.
The types of adjustments that
can be made are described on the
following pages.
Return to automatic mode as
soon as possible.
To Next Page
Loading...
