2
1
NU710_6_G1-FRA 4/03/05 9:32 Page 1.11
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T1-ENG.win 2/5/2005 9:37
-page17
1.11
FRONT HEADREST
To fit the headrest
Slide it upwards to the required
height.
To lower the headrest
Move tab 1 forwards and lower the
headrest to the required height.
To remove the headrest
Press button 2 and lift the headrest
to release it.
To refit the headrest
Insert the headrest rods into the
sleeves, with the notch facing the
front.
Move tab 1 forwards and lower the
headrest to the required height.
The headrest is a safety
component. Ensure that it
is fitted and in the correct
position: the top of your
head should be in line with the top
of the headrest.
To Next Page
Loading...
