Y-RH850-F1X-100PIN-PB-T1-V3 User’s Manual
R20UT3959ED0101, Rev. 1.01 5
2019-11-27
Chapter 1 Introduction
The RH850/F1x Application Board is part of the RH850 Evaluation Platform and
serves as a simple and easy to use platform for evaluating the features and
performance of Renesas Electronics 32-bit RH850/F1x microcontrollers. The
piggyback board (Y-RH850-F1X-100PIN-PB-T1-V3) can be used as a standalone
board, or can be mated with a mainboard (Y-RH850-X1X-MB-Tx-Vx) for
extended functionality.
Main features:
• Socket for mounting of device
• Standalone operation of the board
• Direct supply of device voltage (typ. 3.3V-5.0V)
• Device programming capability
• Device debugging capability
• Pin headers for direct access to each device pin
• Reset switch
• MainOSC circuitry
• Signal LEDs
• Jumpers for device mode selection
• Connectors to MainBoard
This document describes the functionality provided by the piggyback board and
guides the user through its operation.
For details regarding the operation of the microcontroller, refer to the refer to the
related User’s Manual and Datasheet.
This manual describes the following board revisions:
• RH850-F1X-100PIN-PB-T1-V3
For differences to the RH850-F1X-100PIN-PB-T1-V2 see the Revision History.
To Next Page
Loading...
Need help?
General
