RL78/G13 CHAPTER 29 ELECTRICAL SPECIFICATIONS
R01UH0146EJ0100 Rev.1.00 1007
Sep 22, 2011
Caution The pins mounted depend on the product. Refer to 2.1.1 20-pin products to 2.1.14 128-pin products,
and 2.1.15 Pins for each product (pins other than port pins).
Note The following conditions are required for low voltage interface when E
VDD0<VDD
1.8 V ≤ EVDD0 < 2.7 V : MIN. 125 ns
1.6 V ≤ EV
DD0 < 1.8 V : MIN. 250 ns
Remark f
MCK: Timer array unit operation clock frequency
(Operation clock to be set by the CKS0n bit of timer mode register 0n (TMR0n). n: Channel number (n = 0 to 7))
To Next Page
Loading...
Need help?
General
