RL78/G13 CHAPTER 4 PORT FUNCTIONS
R01UH0146EJ0100 Rev.1.00 281
Sep 22, 2011
(6) 24- to 44-pin products: P31/TI03/TO03/INTP4/PCLBUZ0
· Using TO03: PCLBUZ0 output clear to 0
Set bit 7 (PCLOE0) of clock output select register 0 (CKS0) to “0”, which is the same as their default status setting.
· Using PCLBUZ0: TO03 output clear to 0
Set bit 3 (TO03) of timer output register 0 (TO0) and bit 3 (TOE03) of timer output enable register 0 (TOE0) to “0”,
which is the same as their default status setting.
To Next Page
Loading...
Need help?
General
